HEUER Schutzbacke Typ "N", Größe 100, aus Aluminium mit Rillen
€31.61*
Clamping of coarse to medium-fine machined workpieces. The jaws are made of aluminum and have a hardness between copper and lead. 6 grooves hold the workpiece securely. A deeper groove is used for secure clamping of thin shafts, pins, etc.
HEUER Schutzbacke Typ "N", Größe 125, aus Aluminium mit Rillen
€33.69*
Clamping of coarse to medium-fine machined workpieces. The jaws are made of aluminum and have a hardness between copper and lead. 6 grooves hold the workpiece securely. A deeper groove is used for secure clamping of thin shafts, pins, etc.
HEUER Schutzbacke Typ "N", Größe 115, aus Aluminium mit Rillen
€33.69*
Clamping of coarse to medium-fine machined workpieces. The jaws are made of aluminum and have a hardness between copper and lead. 6 grooves hold the workpiece securely. A deeper groove is used for secure clamping of thin shafts, pins, etc.
HEUER Schutzbacke Typ "N", Größe 120, aus Aluminium mit Rillen
€33.69*
Clamping of coarse to medium-fine machined workpieces. The jaws are made of aluminum and have a hardness between copper and lead. 6 grooves hold the workpiece securely. A deeper groove is used for secure clamping of thin shafts, pins, etc.
HEUER Schutzbacke Typ "F", Größe 100, aus Aluminium mit Fiberbelag
€34.86*
Clamping of workpieces with finely milled or planed and ground or polished surfaces. The clamping surface is made of fiber with a special layered structure. Even when clamping heated workpieces, the fiber surface does not deform.
HEUER Schutzbacke Typ "G", Größe 100, aus Aluminium mit Gummibelag
€34.86*
Clamping of thin-walled pipes and barrel parts, wood and plastic parts. The clamping surface is made of special synthetic rubber. Even at very low clamping pressures, the workpieces are held securely.
HEUER Schutzbacke Typ "PP", Größe 100, aus Polyurethan mit Prisma
€34.86*
Spannen von empfindlichen runden und ovalen Werkstücken. Die Backen sind aus Polyurethan. Dieses sehr elastische, widerstandsfähige und alterungsbeständige Material nimmt nach Verformung durch Druck die ursprüngliche Form wieder an. Durch die eingearbeiteten Prismen in unterschiedlicher Größe werden die Werkstücke sicher gehalten.
HEUER Schutzbacke Typ "PR", Größe 100, aus Polyurethan mit Riffel
€34.86*
Clamping of sensitive workpieces of all kinds. The jaws are made of polyurethane. This very elastic, resistant and ageing-proof material resumes its original shape after being deformed by pressure. The fluting engages the surface of the clamped parts without damaging them.
HEUER Schutzbacke Typ "N", Größe 150, aus Aluminium mit Rillen
€35.90*
Clamping of coarse to medium-fine machined workpieces. The jaws are made of aluminum and have a hardness between copper and lead. 6 grooves hold the workpiece securely. A deeper groove is used for secure clamping of thin shafts, pins, etc.
HEUER Schutzbacke Typ "N", Größe 140, aus Aluminium mit Rillen
€35.90*
Clamping of coarse to medium-fine machined workpieces. The jaws are made of aluminum and have a hardness between copper and lead. 6 grooves hold the workpiece securely. A deeper groove is used for secure clamping of thin shafts, pins, etc.
HEUER Schutzbacke Typ "F", Größe 115, aus Aluminium mit Fiberbelag
€37.46*
Clamping of workpieces with finely milled or planed and ground or polished surfaces. The clamping surface is made of fiber with a special layered structure. Even when clamping heated workpieces, the fiber surface does not deform.
HEUER Schutzbacke Typ "F", Größe 120, aus Aluminium mit Fiberbelag
€37.46*
Clamping of workpieces with finely milled or planed and ground or polished surfaces. The clamping surface is made of fiber with a special layered structure. Even when clamping heated workpieces, the fiber surface does not deform.
HEUER Schutzbacke Typ "F", Größe 125, aus Aluminium mit Fiberbelag
€37.46*
Clamping of workpieces with finely milled or planed and ground or polished surfaces. The clamping surface is made of fiber with a special layered structure. Even when clamping heated workpieces, the fiber surface does not deform.
HEUER Schutzbacke Typ "PR", Größe 120, aus Polyurethan mit Riffel
€37.46*
Clamping of sensitive workpieces of all kinds. The jaws are made of polyurethane. This very elastic, resistant and ageing-proof material resumes its original shape after being deformed by pressure. The fluting engages the surface of the clamped parts without damaging them.
HEUER Schutzbacke Typ "N", Größe 180, aus Aluminium mit Rillen
€37.46*
Clamping of coarse to medium-fine machined workpieces. The jaws are made of aluminum and have a hardness between copper and lead. 6 grooves hold the workpiece securely. A deeper groove is used for secure clamping of thin shafts, pins, etc.
HEUER Schutzbacke Typ "G", Größe 120, aus Aluminium mit Gummibelag
€37.46*
Clamping of thin-walled pipes and barrel parts, wood and plastic parts. The clamping surface is made of special synthetic rubber. Even at very low clamping pressures, the workpieces are held securely.
HEUER Schutzbacke Typ "G", Größe 125, aus Aluminium mit Gummibelag
€37.46*
Clamping of thin-walled pipes and barrel parts, wood and plastic parts. The clamping surface is made of special synthetic rubber. Even at very low clamping pressures, the workpieces are held securely.
HEUER Schutzbacke Typ "PP", Größe 120, aus Polyurethan mit Prisma
€37.46*
Spannen von empfindlichen runden und ovalen Werkstücken. Die Backen sind aus Polyurethan. Dieses sehr elastische, widerstandsfähige und alterungsbeständige Material nimmt nach Verformung durch Druck die ursprüngliche Form wieder an. Durch die eingearbeiteten Prismen in unterschiedlicher Größe werden die Werkstücke sicher gehalten.
HEUER Schutzbacke Typ "G", Größe 115, aus Aluminium mit Gummibelag
€37.46*
Clamping of thin-walled pipes and barrel parts, wood and plastic parts. The clamping surface is made of special synthetic rubber. Even at very low clamping pressures, the workpieces are held securely.
HEUER Schutzbacke Typ "N", Größe 160, aus Aluminium mit Rillen
€37.46*
Clamping of coarse to medium-fine machined workpieces. The jaws are made of aluminum and have a hardness between copper and lead. 6 grooves hold the workpiece securely. A deeper groove is used for secure clamping of thin shafts, pins, etc.
HEUER Schutzbacke Typ "P", Größe 100, aus Aluminium mit Prisma
€38.23*
Clamping of workpieces in a wide variety of shapes. The jaws are made of aluminum with a hardness between copper and lead. One horizontal prism and three vertical prisms of different sizes allow clamping of round and oval workpieces. The 90° recess in the upper part of the jaws allows flat material to be clamped horizontally without any problems.
HEUER Schutzbacke Typ "PR", Größe 140, aus Polyurethan mit Riffel
€39.54*
Clamping of sensitive workpieces of all kinds. The jaws are made of polyurethane. This very elastic, resistant and ageing-proof material resumes its original shape after being deformed by pressure. The fluting engages the surface of the clamped parts without damaging them.
HEUER Schutzbacke Typ "F", Größe 140, aus Aluminium mit Fiberbelag
€39.54*
Clamping of workpieces with finely milled or planed and ground or polished surfaces. The clamping surface is made of fiber with a special layered structure. Even when clamping heated workpieces, the fiber surface does not deform.
HEUER Schutzbacke Typ "PP", Größe 140, aus Polyurethan mit Prisma
€39.54*
Spannen von empfindlichen runden und ovalen Werkstücken. Die Backen sind aus Polyurethan. Dieses sehr elastische, widerstandsfähige und alterungsbeständige Material nimmt nach Verformung durch Druck die ursprüngliche Form wieder an. Durch die eingearbeiteten Prismen in unterschiedlicher Größe werden die Werkstücke sicher gehalten.
